Measuring range: | max. 130 mm from front edge sensor |
Measuring frequency: | |
In master mode: | 120 Hz |
In slave mode: | 0 .. 130 Hz |
Accuracy: | In the short range (up to about 20mm from the leading edge sensor): + / - 0.01 mm |
Aperture angle of the sensor: | ± 6 degrees |
Data format: | Serial data transmission (RS232 V24) at 9600 baud, 8 data bits, 1 stop bit. The data output is in ASCII format to the millimeter. |
selectable pre-decimal places | |
Additional adjustments: | averaging, noise suppression, parallel shift (offset) |